AS1020 | Stepper motor without encoder
AS1020 | Stepper motor without encoder
AS1020 | Stepper motor with encoder
The AS1000 stepper motors with flange codes from 42 to 86 mm (N1 = NEMA17, N2 = NEMA23, N3 = NEMA34) and torques from 0.4 to 5 Nm are ideally suited for use as auxiliary axes and positioning drives. They are characterized by robustness and high holding torques. Due to the integrated micro-stepping the motors can position very well even without a feedback system and require only a motion terminal for power electronics. Stepper motors can also be operated with TwinCAT NC PTP for synchronization functions such as cam plates or flying saws.
Product status:
regular delivery
Product information
| Data for 48 V DC | AS1020 |
|---|---|
| Nominal voltage | 24…48 V DC |
| Holding torque | 0.50 Nm |
| Rated current | 1.00 A |
| Resolution | 1.8°/200 full steps |
| Connection method | M12 cable bundle |
| Ambient temperature (operation) | 0…40°C |
| Approvals/markings | CE |
| Housing data | AS10xx |
|---|---|
| Protection rating | IP43 |
| Dimensions | AS1020 |
|---|---|
| a | 22 mm |
| b | 5 mm |
| d | 24 mm |
| k | 48 mm |
| l | 31 mm |
| m | 33 mm |
| o | 24 mm |
| r | 42 mm (NEMA17) |
| Order reference
AS1020-wxyz | |
|---|---|
| w = 0 | smooth shaft with 1 flat |
| x = 0 | standard motor without second shaft |
| x = 1 | second shaft (for AS1020/AS1050/AS1060 only), necessary for encoder |
| y = 0 | no incremental encoder |
| y = 1 | incremental encoder, 24 V DC, 200 increments (only available for AS1020, AS1050, AS1060), requires x = 1 |
| y = 2 | incremental encoder, 24 V DC, 1024 increments (only available for AS1020, AS1050, AS1060), requires x = 1 |
| z = 0 | standard |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use