Ideally suited for use in the packaging and food industries
The anodized servomotors from the AM8700 series combine the advantages of the highly dynamic AM8000 standard servomotors with the requirements of the packaging and food industries. Like the AM8800 series, the AM8700 motors also meet the requirements for hygienic design and are thus intended for use in the food, pharmaceutical and chemical industries. Due to the specially treated aluminum housing of the AM8700 servomotors, the housing surface also withstands harsh environmental conditions and nevertheless has an ideal thermal conduction value. The motor performance is not affected by this. In comparison with the stainless steel housing, the aluminum housing is very light and therefore offers a further advantage, for example when moving axes.
The windings of the AM8700 series are implemented in the innovative single tooth technology, resulting in a high copper space factor. High torques can be achieved due to the high slot fill factor. The full potting of the stator ensures a thermally ideal transition from the winding to the housing on the one hand and mechanical protection of the winding wires against vibration on the other.
As standard, the AM8700 motors have IP69K protection (exclusive shaft output) and can optionally be equipped with a sealing air connection to prevent the formation of condensate. The OCT direct cable outlet also has a hygienic design. All lubricants used are approved by the FDA for foodstuffs.
In order to cover an extensive power spectrum, the anodized motors are offered in the flange sizes R2 to R6, each in three different lengths.
- Reset all filter values
- Results: 15
OCT AM8721 | Servomotor with anodized housing 0.5 Nm (M0), R2 (77 mm)
- Flange code:
- R2 (77 mm)
- Motor length:
- 1
- Standstill torque:
- 0.5 Nm
- Standstill current:
- 0.85 A
- Rated speed:
- 8000 min-1
OCT AM8722 | Servomotor with anodized housing 0.8 Nm (M0), R2 (77 mm)
- Flange code:
- R2 (77 mm)
- Motor length:
- 2
- Standstill torque:
- 0.8 Nm
- Standstill current:
- 1.50 A
- Rated speed:
- 8000 min-1
OCT AM8723 | Servomotor with anodized housing 1.2 Nm (M0), R2 (77 mm)
- Flange code:
- R2 (77 mm)
- Motor length:
- 3
- Standstill torque:
- 1.2 Nm
- Standstill current:
- 2.20 A
- Rated speed:
- 8000 min-1
OCT AM8731 | Servomotor with anodized housing 1.38 Nm (M0), R3 (89 mm)
- Flange code:
- R3 (89 mm)
- Motor length:
- 1
- Standstill torque:
- 1.38 Nm
- Standstill current:
- 1.95 A
- Rated speed:
- 6000 min-1
OCT AM8732 | Servomotor with anodized housing 2.37 Nm (M0), R3 (89 mm)
- Flange code:
- R3 (89 mm)
- Motor length:
- 2
- Standstill torque:
- 2.37 Nm
- Standstill current:
- 2.95 A
- Rated speed:
- 6000 min-1
OCT AM8733 | Servomotor with anodized housing 3.22 Nm (M0), R3 (89 mm)
- Flange code:
- R3 (89 mm)
- Motor length:
- 3
- Standstill torque:
- 3.22 Nm
- Standstill current:
- 4.10 A
- Rated speed:
- 6000 min-1
OCT AM8741 | Servomotor with anodized housing 2.45 Nm (M0), R4 (114 mm)
- Flange code:
- R4 (114 mm)
- Motor length:
- 1
- Standstill torque:
- 2.45 Nm
- Standstill current:
- 3.00 A
- Rated speed:
- 6000 min-1
OCT AM8742 | Servomotor with anodized housing 4.10 Nm (M0), R4 (114 mm)
- Flange code:
- R4 (114 mm)
- Motor length:
- 2
- Standstill torque:
- 4.10 Nm
- Standstill current:
- 4.10 A
- Rated speed:
- 5000 min-1
OCT AM8743 | Servomotor with anodized housing 5.65 Nm (M0), R4 (114 mm)
- Flange code:
- R4 (114 mm)
- Motor length:
- 3
- Standstill torque:
- 5.65 Nm
- Standstill current:
- 5.40 A
- Rated speed:
- 5000 min-1
OCT AM8751 | Servomotor with anodized housing 4.90 Nm (M0), R5 (134 mm)
- Flange code:
- R5 (134 mm)
- Motor length:
- 1
- Standstill torque:
- 4.90 Nm
- Standstill current:
- 4.75 A
- Rated speed:
- 5000 min-1
OCT AM8752 | Servomotor with anodized housing 8.20 Nm (M0), R5 (134 mm)
- Flange code:
- R5 (134 mm)
- Motor length:
- 2
- Standstill torque:
- 8.20 Nm
- Standstill current:
- 6.30 A
- Rated speed:
- 4000 min-1
OCT AM8753 | Servomotor with anodized housing 11.4 Nm (M0), R5 (134 mm)
- Flange code:
- R5 (134 mm)
- Motor length:
- 3
- Standstill torque:
- 11.4 Nm
- Standstill current:
- 8.80 A
- Rated speed:
- 4000 min-1
OCT AM8761 | Servomotor with anodized housing 12.8 Nm (M0), R6 (189 mm)
- Flange code:
- R6 (189 mm)
- Motor length:
- 1
- Standstill torque:
- 12.8 Nm
- Standstill current:
- 7.80 A
- Rated speed:
- 3000 min-1
OCT AM8762 | Servomotor with anodized housing 21.1 Nm (M0), R6 (189 mm)
- Flange code:
- R6 (189 mm)
- Motor length:
- 2
- Standstill torque:
- 21.1 Nm
- Standstill current:
- 12.40 A
- Rated speed:
- 3000 min-1
OCT AM8763 | Servomotor with anodized housing 29.0 Nm (M0), R6 (189 mm)
- Flange code:
- R6 (189 mm)
- Motor length:
- 3
- Standstill torque:
- 29.0 Nm
- Standstill current:
- 17.20 A
- Rated speed:
- 3000 min-1
